De vakkennis van MEVA wordt op aanschouwelijke wijze weerspiegeld in de internationale MEVA referenties. Voltooide en geslaagde projecten vormen de mooiste beloning voor het dagelijkse werk en ze zijn het bewijs van een optimaal samenspel tussen een vernuftig product- en technologieprogramma en topprestaties in project- en constructiewerk. Overtuig u zelf!
Uiterlijk in 2020 vier appartementsgebouwen tot wel 202 m hoog: het cityproject ‘Deansgate Square’. Aan het werk voor in totaal 194 verdiepingen: het automatische klimsysteem MAC
Op- en afritten, wanden en vloeren in zichtbeton, veel balken, hoekige en ovale kolommen van zichtbeton, afgeronde buitenhoeken en afgeschuinde binnenhoeken.
De streek rond Zürich vormt een kruispunt van snelwegen uit alle richtingen. Deze dichtbevolkte regio heeft elke ochtend en avond niet alleen te maken met dicht transito- en doorgaand verkeer, maar ook met pendelverkeer.
Vloerhoogten van 2,90 m tot 5,80 m, afgeschuinde wanden voor schuin aflopende platte daken, stompe hoeken bij de binnenen buitenwanden: bij het nieuwe “Jugendhaus” in het Duitse plaatsje Biberach vereiste de complexe geometrie het vakmanschap van de MEVA bekistingsplanners en de bouwonderneming.
De STB 450 heeft al vaak bewezen hoe goed hij is in het verticaal schoren. Op een brug over de snelweg ten noorden van Frankfurt wordt hij horizontaal gebruikt voor de brugpijlers.
Toen het Széll-Kálmán-plein nog Moskouwplein heette, stond op die plek vele jaren lang een drager van stalen vakwerk met een klok er bovenop.
Bij een onderaards regenwaterbassin in Bern van meer dan 40 jaar oud moeten de kolommen met een oppervlak van 60 x 60 cm worden verstevigd tot pijlers met een doorsnede van 1,10 m.
Met de nieuwe hal 10 breidt de Neue Messe Stuttgart haar tentoonstellingsoppervlakte uit met 14.600 m² naar 120.000 m².
Op de Fred-Zinnemann-Platz in het 3e Weense district wordt de ruwbouw van het wooncomplex Trienna Living met ongeveer 400 koopappartementen, een parkeergarage en een winkelpassage langzaam maar zeker afgerond.
In 1903 werd één van de meest opmerkelijke gebouwen van Mannheim uit 1846, 500 m van de watertoren van Mannheim vandaan, ingewijd als nieuw onderkomen van de turnvereniging TSV Mannheim.
De St. Jakobshalle die in 1975 werd geopend, biedt een ruimte van 22.000 m² voor sport en evenementen.
De MevaDec paneelmethode is optimaal bij vloerranden, in kleinere ruimtes, bij een complexe plattegrond en als vroegontkisten voor het verloop van de werkzaamheden geen voordelen oplevert.
Het stadsspoor Karlsruhe transporteert de reizigers uit de omstreken rechtstreeks naar de Kaiserstraße in het centrum van de stad.
Groot bouwterrein in Regensburg: de bouwwerkzaamheden onder leiding van het “Staatliche Bauamt Regensburg” zijn in volle gang. Beieren investeert in totaal 67,3 miljoen € in het “Museum der Bayerischen Geschichte”.
Hoger, sneller, rationeler: Op het terrein van de voormalige papierfabriek Attisholz in Luterbach bij Solothurn in Zwitserland wordt een nieuwe biofarmaceutische fabriek gebouwd voor het Amerikaanse biotechconcern Biogen
De nieuwbouw van een supermarkt en wooncomplex: referentiebouwplaats voor het American Concrete Institute
„Dat was alleen mogelijk met de 3D-planning, door nauwe samenwerking en dankzij de flexibiliteit van de ingenieurs van MEVA“, aldus het commentaar van uitvoerder Matthias Unglert over de steunpilaren.
Het project omvat 3 vleugels die om een grote binnenplaats heen worden gebouwd. De plattegronden, die ten dele van elkaar verschillen, vereisen een zorgvuldige bekistingstechnische planning.
Woningbouwproject met 400 eensgezinswoningen – in zo'n geval ligt de lichte, stevige en kraanonafhankelijke handbekisting AluFix het meest voor de hand.
Voor de krom lopende muren werd in dit geval een speciale constructie gebruikt die voorzien was van alkus kunststof platen.
De vloeren moesten worden uitgevoerd met een harmonisch gestructureerd onderaanzicht in zichtbetonkwaliteit SB3. In dit geval koos men voor MevaDec met de elementmethode.
De portaalwanden (tot 6 meter dik) naar de ingang van de tunnel worden enkelzijdig gestort en geleid geklommen met de MGC en Mammut 350.
Vereiste was een symmetrisch voegbeeld en een symmetrische rangschikking van de ankergaten en verder een glad betonoppervlak zonder paneelafdrukken.
Het High Park Berlijn komt te liggen op het laatste vrije bouwterrein op de Potsdamer Platz, vlakbij het Brandenburger Tor. De bouw wordt met MEVA huurbekisting uitgevoerd.
In het stadsdeel Anjirwadi van de Indiase metropool Mumbai wordt voor de oorspronkelijke bewoners van de wijk Bhendi Bazar een nieuw wooncomplex (Transit Camp Project) gebouwd. 15 jaar lang mogen zij gratis in dit complex wonen terwijl het mega woonproject cluster 3A en 3B wordt gebouwd. Noor Enterprises heeft gekozen voor de beproefde bekisting van MEVA en wordt gezien als een pionier als het gaat om het gebruik van moderne bekistings- en veiligheidstechniek.
De stuwdam die gebouwd werd van 1878 tot 1882, wordt hersteld en krijgt bij die gelegenheid een krachtige hoogwaterontlasting. Alle delen van de nieuwe installatie worden gemaakt met huurbekisting van MEVA.
De aanbesteding had nogal wat voeten in de aarde: 100 kN/m² betondrukopname van de MEVA Mammut 350 volledig benut
Meva Bekistingssystemen in gebruik bij de Burgbergtunnel in Erlangen: Dit levert niet alleen bouwtechnische uitdagingen op. Er moet ook rekening worden worden gehouden met gebouwen die onder monumentenzorg vallen.
Groot bouwterrein in het centrum van München: op het terrein van de historische Kegelhof bouwt de woningbouwvereniging GWG 38 nieuwe woningen.
Met een goede planning bespaar je 10 werkdagen tijdens de bouw van de Brug Békéscsaba. Dankzij het werk van de MEVA ingenieurs in Budapest liep alles op rolletjes: de veiligheids- en bouwtechnische verklaringen, het opbouwen van de klimeenheden, de wapening, de stortfases en de klimfases zelf.
One challenge was pouring hundreds of columns with large mushroom-shaped column heads.
Construction of 4 city condominiums and one city villa with parking garage and pool on the banks of the river Rhine
Vervangende nieuwbouw van de brug op de autosnelweg A45 Münchholzhausen met steigertoren Space en MEVA wandbekisting Mammut 350
Bouwen aan de Berlijnse Muur - Balkons zwevend ondersteund met MEVA.
In de Nederlandse stad Emmen wordt een nieuw, ultramodern en multifunctioneel theater gebouwd. Het behelst het theater en de wereld van ontmoeting.
Voor het bouwen van de betonnen wanden is gebruik gemaakt van de systeembekisting van MEVA. De systeembekisting Mammut is hiervoor een ideale keuze, omdat een strakke en eenduidige afwerking kan worden gegarandeerd.
Large-Scale Residential Expansion with MEVA wall formwork MevaLite and Imperial and climbing platform KLK.
A special task force was formed at nearby MEVA Austria headquarters to master the complex concrete works and formwork challenges.
Triplex is a statically effective brace for formwork higher than 6 m.
The wall formwork system Mammut 350 was chosen because of its symmetric tiehole and joint pattern and its standard all-plastic facing alkus.
Concrete works rely on the heavy- duty Mammut 350 (Imperial in the USA) wall formwork and its load capacity of 100 kN/m².
The MevaDec slab system proved once more to be best in class in terms of cost, speed, efficiency and quality.
The challenge facing MEVA engineers was translating the architect’s 3D model into a buildable and realistic plan in the first place.
The MEVA formwork engineering team came up with a clever idea to ensure the worker safety.
The tower is being built with the hydraulic automatic climbing system MAC, MEVA Mammut 350 and MGC.
The shafts are being climbed with Mammut formwork panels placed on MGC climbing platforms on the outside and on shaft platforms on the inside.
The architects specified a superior fair-faced concrete finish. It was achieved with every pour using specially prepared rented MEVA Mammut 350 wall formwork.
Safety is top priority on the site: all-around fall-down protection plus safe ladder access on MEP shoring towers as well as column formwork with integrated working platform and a fixed ladder with safety cage.
Site management decided on the Mammut 350 wall formwork draped with Zemdrain® formwork sheets which make the use of release agent unnecessary.
Work was completed in just 15 concrete pours using more than 170 m² of Radius from the Leada Acrow fleet of MEVA formwork.
The architects demanded a superior concrete finish that was easily achieved with the panels‘ all-plastic facing alkus.
The new Alaudagasse station and the switch shaft south of it are being poured using MEVA formwork.
MEVA’s heavy duty Mammut 350 wall formwork with its 100 kN/m² load capacity proved ideal for the high walls.
The biggest challenge was forming the cantilevering roof slab at heights of 9 to 12 m, for which the MevaFlex forms rested on high MEP shoring towers.
The prestigious Battersea development project in London relies on MEVA formwork technology, including the guided climbing system MGC, pre-bent all-pplastic alkus sheets on the Rundfix circular formwork and the circular formwork Radius to deliver the superior concrete finish required by the architects.
MEVA formwork Mammut 350, KAB, KLK and Triplex heavy-duty braces on this giant construction site in Switzerland
The MevaDec slab formwork system covers all of the most important slab forming methods.
MEVA AluStar panels are on stage to shape Europe’s largest sailing pool directly in front of the original racing yacht Alinghi SUI 100, which was the first European boat ever to win the coveted America Cup.
They used heavy-duty Mammut wall formwork, MEVA KLK 230 climbing formwork, Co-Planar and MEP falsework plus Soliders, Super A-Beams and support frames STB 450.
The new 11-level car park at Salzburg’s State Hospital has no ramps to connect the levels with each other. The trick is that the entire parking level is inclined in both directions, with 14 inclinations each per level. The MevaDec slab formwork is being used to pour them without crane. The concrete finish remains as is.
6.50 m high, 12 m long walls formed with Mammut 350 and just one extension (3 and 3.50 m)
Large areas poured with heavyduty Mammut 350 formwork.
The Mammut 350 fresh concrete load capacity of 100 kN/m² made it possible to pour at any speed up to a wall height of 4 m.
Contractor Kurt Motz rented 520 m² of the Mammut 350 wall formwork to pour the building and retaining walls and columns.
The tower is climbing with MEVA’s automatic hydraulic climbing system MAC.
The concrete furniture is poured with the all-plastic facing used in all MEVA products since 2000.
Contractor Marti from Zurich, Zwitzerland uses MEVA wall formwork Mammut 350 because of its high concrete load capacity of 100 kN/m². It allows free pour speeds up to 4 m without taking concrete type of ambient temperatures into account.
A tough challenge for the MEVA engineers, who solved it using the Support frame STB 450 with extensions.
The bridge piers are up to 37 m high and have identical cross sections of 5.10 by 2.40 metres. The piers were poured using MEVA Mammut wall formwork.
17,000 m² of slabs in the lower levels were formed using an inventory of only 1,200 m² of the slab System MevaDec.
The boxout construction was attached to MEVA‘s StarTec formwork that on this site was used for over 2 years to pour the many walls of the complex.
Water Power Station “Illspitz”being built where the river Ill flows into the Rhine
MEVA climbing technolgy MAC and MGS are safety and efficiency solutions - as shown on the Hotel One site in Manila, Philippines
In order to waterproof the complete concrete structure along the Danube, concrete was poured entirely without any ties. The wall, 4.5 m high and 1 m wide, was poured usind single-sided support frames and brackets on both sides.
Logistische Herausforderung beim Neubau der Rathaus-Galerie in Hagens Innenstadt mit Tiefgarage, Bau und Abriss laufen parallel, Baumaterial und -gerät wird über eine einzige Rampe angefahren, Innenstadtbetrieb bleibt unberührt, auch dank MEVA reibungsloser Baufortschritt und hohe Qualitätsstandards gewährleistet.
The first and second pours used 3 m Mammut panels outside and 2.50 m high panels on the inside without compensation areas and without vertical joint imprint.
MEVA‘s Mammut 350 wall panels with the all-plactis facing alkus were mounted on foldable KAB working scaffolds that served as clim -bing units.
AluFix covers the slab formwork with the same panels used for the walls by using props with special prop heads.
The light-weight AluStar was up with only seven flights.
MEVA’s flagship product Mammut was flexible enough to offer solutions for the construction of the retaining walls.
Mammut 350 panels 250/100 cm panels were employed to achieve the required joint pattern imprint.
MEVA formwork technology helps build modern homes for Iran’s middle class and is used at large scale
MevaFlex and MEP props were also used to support the balconies. The slabs were cast using the MevaDec slab formwork.
MEVA formwork had to master exceptional concrete pressures during the pours.
The high walls of the new Novartis production facilities are poured using the Mammut 350 wall formwork.
The carriage was completely pre-assembled at the MEVA plant in Haiterbach and moved to the site on a heavy-duty low platform trailer.
Bridge construction with MEVA formwork systems: EcoAs, Mammut, KLK 230, and shoring system MEP.
The MEVA engineers were challenged to provide a static concept, starting with a cost-effective method of pouring the floating ceiling for the conference room.
The Mammut 350 has a concrete load capacity of 100 kN/m², permitting very fast concrete pours of up to 4 m in an hour.
Walls and foundations were poured using the strongest available wall formwork – the Mammut 350 with a load capacity of 100 kN/m².
The entries of several tunnels were poured using a modular formwork solution that MEVA designed and built for fast and multiple use in the mountainous terrain
The tower is being climbed using MEVA‘s automatic hydraulic System MAC. With its completely closed platform it provides a safe working environment even at great heights.
Mass house building: A new method using MEVA’s wall formwork AluFix saves time and money.
Springfield Regional Medical Center, OH built with MEVA Imperial and MevaLite
Polygonal Walls with Standard MEVA Formwork Panels MevaLite
MEVA single-sided forming with support frame STB and wall formwork Imperial for 27’ high walls, Truman School in New Haven, CT
MEVA Imperial easily handles high walls with wall steps and buttresses
Busterminal Merseburg met Betonstorten zonder voegen of afdrukken. MEVA engineers hebben een unieke technische procedure ontwikkeld met de 100% houtvrije bekistingsplaat.
Heinrich-Braun Clinic in Zwickau, Germany: 4-storey building erected using Mammut 350 wall formwork from rental fleet. Excellent, smooth concrete finish achieved with a symmetrical tie hole and joint pattern
MEVA KHK in Dubai were consulted to design and provide a comprehensive formwork solution for the island´s large-scale infrastructure projects.
MEVA Imperial and MevaDec formwork for a Courthouse in Ontario, Canada . Impressed by how quickly the panels go together, the light-weight clamps and the high-quality concrete finish.
The question was: How to “build” the required working platform 40 metres over ground if standard solutions cannot work? The answer is: Use STB 300 support frames and attach them horizontally to the tower.
De ingenieurs en bekistingstechnici van MEVA bewezen eens te meer dat ze niet alleen beschikken over technische vakkennis, maar vooral ook over creativiteit en vindingrijkheid.
The MEVA Guided Screens protection system MGS encloses complete floors protecting workers and equipment against wind and weather. Together with other MEVA systems, MGS is in use on an office tower that is being built in a mixed residential and office area outside Zurich.
The MEVA support frames are mainly – but not only – used to support single-sided wall formwork when, for example, pouring against an existing structure.
The MEVA shoring tower is easy and fast to lift and relocate by crane and saved much time.
Contractor Maïa Sonnier S.A. used different MEVA formwork systems and solutions to efficiently handle the various forming challenges when building the tunnel and bridges required for the inner-city rail link in populated area.
MEVA Mammut met alkus bekistingsplaten wordt gebruikt op Schiereiland IJdock, Amsterdam
MEVA’s slab formwork system MevaDec and the girder formwork MevaFlex are used to pour the slabs of three office towers, Doha, Qatar.
Aan de stroomzijde is de dam uitgebreid met een nieuw afdichting- en drainagesysteem met MEVA bekistings.
Formwork for slabs, columns and walls was supplied by local MEVA distributor Alzner Baumaschinen to contractor Kreuzberger Bau GmbH.
The architects of the new library in the German town of Rutesheim stipulated highest demands on the concrete finish. The result was achieved with every pour of 3.46 - formed using the Mammut 350 wall formwork wihout extensions and without horizontal joint. The symmetrical tie-hole and joint pattern was approved by the architects.
Bridgestone Tire´s world headquartersb with parts of it in architectural concrete
Rough River Spillway Extension: Tough Schedule and Tough Conditions.
MEVA was chosen to provide the forming for the 1st Nuclear project built in the United States in over 20 years.
Pouring concrete against rock: single-sided formwork solution from MEVA wins on technical counts.
The formwork solutions for foundations, beams, cores, walls, slabs and columns were designed and provided by MEVA KHK.
Innovation in Bridge Construction with MEVA Column Formwork
MEVA Mammut en StarTec wordt gebruikt voor het fundament van het Nieuw Babylon, Den Haag
MEVA Imperial and STB for healthy water in Canada.
275,000 ft² on 4 levels, Parking garage, 318 offices, lectures halls, 250-seat auditorium with MEVA fomworks MevaLite, Imperial, STB, KLK
MEVA formworks building five new cores that form the heart of the Miami Valley Hospital Dayton, OH.
MEVA Engineers are known for their creativity in combining standard formwork with specially designed forms to achieve economically and technically viable solutions.
The engineers consulted MEVA´s formwork expertise because the expectations on concrete finish are very high. MEVA suggested using the unique shoring tower SPACE.
MevaDec wordt gebruikt voor nieuw zorgcomplex in Heerlen
MEVA Mammut wordt gebruikt voor nieuw Hotel met Zichtbeton
MEVA verzorgt de planning, de bekisting en het toezicht op de bouw
MEVA Mammut en de kunststof bekistingsplaten alkus gebruikt voor waterwerk in Ballymore Eustace.
Complete MEVA bekistingsoplossing. MEVA Bekisting en klimsystemen zijn gebruikt voor de betonstortwerkzaamheden een Palais Royale Mumbai.
One Rockwell is currently the largest MevaDec site on the Philippines. It is the safe and simple solution in slab forming, using the same parts and easy assembly. Its flexibility allows all slab layouts to be formed with a minimum of compensation areas.
NEF National Enrichment Facility with more than 150,000 ft² MEVA wall formwork Imperial and MevaLite.
The high daytime temperatures required adding a retarder to the concrete, which resulted in the final setting occuring only after 15 hours. Nevertheless, the Mammut 350 has sufficient reserves to cope with load peaks of 100 kN/m².
The MevaDec slab formwork system achieved a record-breaking 154 levels and 224,808 m² without a single re-facing and without a single delay.
A simple, sophisticated design featuring few components and time-saving details distinguishes the MEP Shoring System, which consists of only three parts and, yet, is versatilely applicable: as single prop, slab table or shoring structure.
Water purification plant on Lake Ontario with 31 ft high dam wall formed with MEVA formwork Imperial and STB.
MEVA heavy-duty wall formwork Imperial for Proton Therapy Center, Houston, TX
Mirax Tower Federazija with 440 m Height in Moscow with MEVA Formwork-Systems Mammut and all-plastic facing alkus.
Railway Line between St. Pölten and Vienna: A new regional railway concourse for which the architects intended unique concrete geometries and special finishes
Mammut wall formwork and pre-bent alkus plastic sheets are used to form the wineglass-shaped bridge piers for a motorway crossover
Reconstruction of the Interstate highway 95 in Bridgeport, Connecticut, USA with MEVA Formwork Systems
An extraordinary projection tower in the newly built headquarter of a German publishing house challenged the architects as well as the contractor and MEVA as the formwork supplier.
Spoorbrug over het Hollandsch Diep. Caisson uit gewapend beton en MEVA Mammut-elementbekisting.